Technical And Functional Features; Instructions For Installation Of Software; System Requirements - Henco M-BMINI3 Manuel D'instructions

15.

Technical and functional features

• Th e body of the pump and all components are made of high resistance ma-
terials and tested.
• Th e casing is entirely made of isolating, shock resistant polyamide, rein-
forced with fi breglass.
• Th e equipment has a light, compact and robust structure.
• Th e range of the operating temperature is between –10°C and +40°C.
• Th e pressing power of the pump is 19kN.
• Th e safety valve of the system is adjusted to 25kN.
• Th e machine has a great reverse capacity for more rapid processes.
• Th e progress of compression can be shown on the PC (pressure and opera-
ting time).
• Control of the equipment is realised through a micro-controller.
• Pressure control is performed by an electronic pressure sensor.
• Th e charge of the power pack is constantly kept under control.
• Management of technical assistance is performed with an electronic sys-
tem.
• Th e traceability of processes is ensured by automatic registration and saving
in the machine memory.
• Th e data saved can be read and the software can be updated by a mini USB
interface.
• Additional LED indicators provide rapid information on the status of the
machine.
• Th e fi rst service assistance should be performed after 20,000 cycles, but we
advise a yearly check-up to garantuee a proper function of the machine
16.

Instructions for installation of software

16.1

System requirements

Th e PC where the software is installed must fulfi ll the following requirements:
Operating system:
CPU:
Random acces memory: 512 MB or more (we advise at least 1 GB)
Hard disc:
M-BMINI3
Windows XP, Windows Vista, Windows 7
Pentium 4; 1,7 GHz minimum
200 MB (1 GB we advise)
29