Work Process Pressing; Maintenance Instructions - Henco M-BMINI3 Manuel D'instructions

13.

Work process pressing

Th e pressing process is carried out automatically on pressing the start/stop
button [4] on the handle. Th e resulting connection is permanent and longitudi-
nal force-locked.
Th e operation can be interrupted
1. during the initial phase by releasing the start/stop button [4]
2. at any time by pres-
sing the reverse button
[5]
Having interrupted
the pressing process,
the connection can be
pressed once again if
form and position of
the pressfi tting con-
nection part engaged
have not been chan-
ged, especially in radial
direction.
14.

Maintenance instructions

After usage pressing tool must be cleaned and stored in a dry place. Th e power
pack and battery charger must be protected from humidity and foreign mate-
rials.
After the previously set processes are completed it is necessary
to take the crimping tool to the technical assistance service for
inspection to guarantee perfect operation and increase the life-
time of the machine. Th e customer is not authorised to perform
maintenance.
28
by releasing the start/stop button [4] by releasing the start/stop button [4]
4
5
M-BMINI3