Remote Control - Tivoli Audio PAL+ Manuel Du Propriétaire

for an auxiliary device than the level used for radio listening. Keep the rubber plug
inserted when this input is not in use.
5. BATTERY COMPARTMENT: Houses the PAL+ NiMH battery pack. A mini-B USB in-
terface is located behind the padding. This input is for service use only. Any other use
of this jack could damage the PAL+ which would not be covered under the warranty.
Guide to Features (Remote Control):
(A separate holder for the remote control is included. It incorporates adhesive tape on
the backside. Peel off the backing and apply the holder to either side of your PAL+.)
4
2
3
12
11
8
1. POWER: Press briefly to power the PAL+ on. The radio will power on to the last source
used. Press again to power off. The remote's Power button will not turn the PAL+ on
when the unit is off and not connected to the external power supply.
2. MUTE/SNOOzE: Press to mute the audio (the
unit is playing and press again to restore sound, or adjust the volume. Press to mute the
alarm after the alarm sounds. A
The Snooze time is fixed at 7 minutes and is not adjustable. The Snooze function works
when the PAL+ is connected to the external power supply. When operating on battery-
only power, pressing Snooze will have no effect.
3. ALARM: Use the pq and Select buttons to adjust and set the alarms. For very
important notes and a complete step-by-step guide, refer to the section titled "How
to set the Alarm".
4. SLEEP: Press repeatedly to view the amount of time the radio will play before it turns
off automatically and press the Select button to select that time. When the sleep timer
is active you can check the remaining time by pressing the Sleep button on the remote.
BAC K
MONO
icon will show no volume bars) while the
icon will show on the display when Snooze is active.
English
5
1
6
7
9
13
10
14
11