Master Spas TWILIGHT Serie Manuel De L'utilisateur page 53

SPA CONTROLS
The Settings Screen
HEAT MODE – READY VS. REST
In order for the spa to heat, a pump needs to circulate water through the heater. The pump that
performs this function is known as the "24 hour Circ."
REST Mode will only allow heating during programmed filter cycles.
Circulation Mode See "Spa Behavior" section.
The heater pump generally runs continuously. Since the heater pump is always running, the spa
will maintain set temperature and heat as needed in Ready Mode, without polling.
In Rest Mode, the spa will only heat to set temperature during programmed filter times, even
though the water is being filtered constantly when in Circulation Mode.
Settings
Temp Range
Heat Mode
Back
Time of Day
Filter Cycles
Light Cycle
Invert Panel
Lock
READY-IN-REST MODE
READY/REST appears in the display if the spa is in Rest Mode and the Jets 1 Button is pressed. It is
assumed that the spa is being used and will heat to set temperature. After 1 hour, the System will
revert to Rest Mode. This mode can also be reset by entering the Settings Menu and changing the
Heat Mode.
DO NOT DIVE.
High
Ready
Normal
51