Beginning Work With The Machine - Taski diversey swingo 755B Power Manuel D'instructions

Dosage cup application
• Fill the product you have measured
with the dosage cup into the fresh
water tank.
• Slightly lift the tank cover.
• Push the tank cover support slightly inwards.
• Close the tank cover.
• By pushing gently on the front part of the tank cover you
lock the tank.
Notice:
TASKI offers an automatic dosing feature as an op-
tion. It is possible to mount it additionally.
- Please contact your customer service.
Pre-cleaning
Warning:
Remove any objects (wooden, metal parts etc.)
from the cleaning surface.
The objects could be catapulted by the rotating tool, and
thereby cause injuries to people and damage to the en-
vironment.

Beginning work with the machine

Warning:
Always wear slip-resistant shoes and appropriate
working clothes when working with this machine!
Notice:
To ensure safe operation, always keep both hands
on the steering wheel/driving handle while operat-
ing the machine.
Warning:
When driving the machine for the first time, test it
out in an empty space to get familiar with the ma-
chine.
Warning:
If there is a danger of falling objects during use of
the machine, the necessary safety precautions
must be taken or adhered to in accordance with na-
tional regulations.
• Lower the suction nozzle.
Variant: Automatic brush lowering (Option 1255B)
• Press the Brush drive button ON/
OFF.
Variant: Foot pedal
• Unlock the foot pedal and lower the
tool slowly.
Cleaning start
• Switch the machine on.
The indicator elements lights up briefly.
• Press the suction unit ON/OFF but-
ton.
The display lights up; the suction en-
gine starts.
• Press the Cleaning solution supply
ON/OFF button.
The display lights up.
The cleaning solution supply is start-
ed when the brushes rotate.
• Select the desired dosing by press-
ing the +/- buttons from level 1-6.
Notice:
Diversey recommends sustainable working by de-
termination of the correct product dosing quantity.
Overdosing or underdosing will lead to unsatisfactory
cleaning results.
• By gently pushing the driving switch
into the direction of movement the
machine is set into motion.
Power off function
Notice:
The machine turns itself off after 5 minutes when no
longer in use.
During these 5 minutes:
• the brushes may not be manipulated in any way.
• the user must not leave the machine out of sight.
• sucked in or jammed objects may be cleaned from the suc-
tion nozzle only.
• the user is only allowed to leave the machine in order to
clear the work space. The user must maintain visual con-
tact.
9