Operation - CLAS PE 6000 Mode D'emploi

PE 6000 PE 6001
MOBILE SCISSOR LIFT DUAL CYLINDER LOW RAISE 3T MOVABLE ELECTRO HYDRAULIC LIFT
MODE OF OPERATION
Only skilled and trained personnel are permitted to carry out this operations.
Check the procedures as follows.
Operating alerts:
Before any operation, remove any obstacles from the lifting area of the lift.
During lifting or downhill, no operator is permitted to remain in the side area of the
machine, underneath it or on both platforms.
Avoid lifting vehicles above the maximum permissible lifting weight.
When placing the vehicle on the platform, make sure that the body is resting on the
provided rubber pads.
Pay attention to the synchronization of the lift. If there are anomalies, stop each operation
in a timely manner, check and resolve the problem.
When the equipment is not used for a long period of time or at night, the lifting gear
must be lowered to the complete closing, remove the vehicle and stop the power supply
Instructions for the electronic drive:
Image 24 (panneau de contrôle)
45