Apex Domus 4 Instructions D'utilisation page 9

English
3. INSTALLATION
English
Unpack the box and check the package contents for completeness.
Package Content List
 Mattress unit x 1 (may not be included if only pump unit is purchased)
 Pump Unit x 1
 User Manual x 1
Inspect equipment for damage which may have occurred during shipment. If there is damage, please
contact your dealer immediately.
3.1 PUMP & MATTRESS INSTALLATION
1. Place the mattress or pad on top of the bed frame.
Please note for the foot end. If it is an overlay system
(mattress height less than 8"), please make sure there
is a foam or a current mattress underneath.
WARNING: The overlay mattress must be applied
on the underlying mattress.
2. Hang the pump onto bed rail (foot-end), and adjust
hangers to best upright position of the pump, or place
the pump on a flat surface.
3. Connect air hose connectors from air mattress to the
pump unit. When a "click" sound is felt or heard, the
connection is completed and secured.
NOTE: Check and ensure the air hoses are not
kinked or tucked under mattress.
4. Plug the power cord into electrical outlet.
NOTE:
1. Make sure the pump unit is suitable for the local
power voltage. Do not position the equipment
so that it is difficult to operate the disconnecting
device.
7