PhysioStim Device Model 5315CE
PhysioStim device model 5315CE is intended for placement on the hip
(proximal femur). Proper treatment does not require direct contact with the
body. However the coils must be centered around the fracture site to be
effective. User can gently bend and shape the treatment coils to fit more
comfortably around the body.
*PhysioStim device model 5315CE comes from manufacturing configured for
a right hip (proximal femur). To configure the device for a left hip (proximal
femur), unthread the strap from the triple bar. Once the strap is detached from
the device, rethread the strap through the opposite side of the device and
back through the triple bar. Proceed to step 1 under 'to apply' below.
To Apply
1. Fasten one end of the elastic strap to the device.
2. Place the PhysioStim device so that it is centered over the affected hip (left
or right).
3. Bring the elastic strap around the body and fasten on the opposite end
of the device.
4. To adjust the strap length, use the square plastic slide buckle.
5. To loosen or tighten the strap, use the velcro.
11