JANE Montecarlo R1 Mode D'emploi page 31

MAINTENANCE
Do not expose the upholstery to sunlight for prolonged periods
of time, when the safety seat is not in use cover it up or store it
in the boot.
Clean the plastic parts with soap and warm water, and then dry all
the parts thoroughly.
The upholstery can be taken off for washing. Follow the instruc-
tions below:
- Headrest. Release the 2 clasps from the sides, unfasten the strap
on the back and pull the upholstery forwards, then release the
two clasps from the top part.
- Backrest. Unfasten the three straps on the back and the clasps on
both sides and then pull the upholstery forwards.
- Booster seat. Unfasten the clasps on the back, release the elastic
and the two clasps on the front part and then pull the upholstery
from the front.
For your safety and the good conservation of this product, it is
important to bring it to one of our official workshops for regular
inspections.
Please see link: www.jane.es for more information on how
to assemble your new MONTECARLO R1.
IM-1388.06 MONTECARLO R1.indd 31
31
28/10/16 10:39