Listening To A Bluetooth Component; Connecting An Already-Paired Component Via Bluetooth - Yamaha MCR-B142 Mode D'emploi

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT

Listening to a Bluetooth component

1

Connecting an already-paired component via Bluetooth

Once pairing has been completed, connecting a Bluetooth will be easy the next time.

Connecting from this unit
1 5 : 3 0
1 5 : 3 0
B T D T A i P h o n e

Connecting from the other component
In the Bluetooth settings of the other component, turn Bluetooth on.
1
From the Bluetooth connection list of the other component, choose this unit (MCR-B142 Yamaha).
2
The Bluetooth connection will be established, and the front panel display of this unit will indicate the name of the other
component.
Bluetooth connections cannot be established from the other component when this unit is in power-conservation. Turn the system on.
12
En
1 Press the source button to switch the audio
source to Bluetooth.
2 Connect this unit and your other component
via Bluetooth.
Play back music from your Bluetooth
3
component.
Take care that the volume setting of this unit is not too high. We
recommend that you adjust the volume on the other component.
• If you connect via Bluetooth from your other component and play
back music while this unit is turned the system off, this unit will
automatically turn the system on.
• If you disconnect the Bluetooth connection from your other
component while the audio source is set to Bluetooth, this unit
will automatically turn the system off.
• If Bluetooth is selected as the audio source, this unit will
automatically turn the system off when 60 minutes have elapsed
without any Bluetooth connection nor any operation performed.
Press the source button to switch the audio
source to Bluetooth.
The Bluetooth indicator will blink in the front panel display;
this unit will search for the other component that was most
recently connected via Bluetooth, and will then establish a
connection (You must first turn on the Bluetooth setting of
the other component).
When the Bluetooth connection has been established, the
Bluetooth indicator will light, and the name of the other
component will be displayed.
Yamaha does not guarantee all connections between this unit and
Bluetooth component.