Playing music from your iPod
• For details on compatible iPod models, refer to "SPECIFICATIONS" (P. 25).
• Your iPod can also play back music and recharge while connected to the USB port (☞ P. 10).
1
2
Dock adaptor
(☞ P. 3)
iPod menu operations (remote control only)
You can use the remote control to operate your iPod.
Display information (remote control only)
If you press DISPLAY on the remote control while a song is playing or paused, the information shown on the front panel
display will be switched in the following order.
LISTENING TO YOUR iPod
Switch menu items / Return to the previous menu
MENU:
▲/▼:
Move between items in the menu
ENTER:
Confirm
Elapsed song playback time
Song name
Album name
Artist name
1
Press the iPod source button to switch the
audio source to iPod.
2
Set your iPod in the iPod dock (☞ P. 3).
3
Play the iPod.
Playback can be controlled with either the remote
control, iPod or the front panel on this unit (☞ P. 4, 5).
• Performing the following operations will automatically switch the
audio source to iPod and start playback even if this unit is system
off.
− Connect your iPod in the playback state to the iPod dock.
− Play back the connected iPod.
In some cases, the audio source might not switch automatically
if the audio source is USB or if there is currently a Bluetooth
connection.
• If USB is selected as the audio source, the iPod will not be
recharged.
• You can remove the iPod during playback.
• If iPod is selected as the audio source, this unit will automatically
turn the system off when 60 minutes have elapsed without a
device being connected to the iPod dock nor any operation
performed.
7
En