Setting The Alarm - Yamaha MCR-B142 Mode D'emploi

USEFUL FUNCTIONS

Setting the alarm


Setting the alarm time and alarm type (Option menu)
The alarm will not function when the unit is in power saving (☞ P. 16). To use the alarm function, set the Option menu item POWER
SAVING to NORMAL.
1
2 3
4
Alarm time
9 : 1 2
C o m p l e t e d !
Alarm indicator
18
En
1 Press OPTION.
The option menu will appear.
2 Press  /  to select "ALARM SET", and then press ENTER.
The alarm indicator (
3 Set the alarm.
Set items 1 - 5 described below.
Press / to select a numerical value, and press ENTER to confirm it.
 
Items
ALARM SELECT * This can be selected after you've used the "DTA
1
ONE DAY: An alarm that sounds only once at the
WEEKLY: An alarm whose time can be specified for
If you've chosen WEEKLY, this completes the alarm
setting.
2
ALARM TIME
Make settings in the order of hours
ALARM TYPE Select from SOURCE+BEEP, SOURCE or BEEP. For
3
details, refer to "3 types of alarms" (P. 17).
If you selected BEEP, proceed to item
4 SOURCE iPod:
(If you selected
SOURCE+BEEP or
SOURCE as the
alarm type)
CD:
USB:
FM/AM*:Play a FM/AM* station.
* AM radio is available only for U.S.A. model.
If the selected source cannot be played back at the time set
for the alarm (e.g., the iPod is not connected), the beep
sound is played back.
If you choose RESUME when specifying the track/folder/
preset number, the last-played track/folder/station will be
played (resume playback).
5 VOLUME Specifies the volume (5-60) of the alarm.
4 Complete the settings.
When you set the VOLUME for item
"Completed!" and your settings will be confirmed.
The alarm will be turned on and the alarm indicator (
If you press OPTION or turn off the system while making alarm settings, the settings
will be cancelled.
) and numerical value you're setting will blink.
Setting or range
Controller" to set the alarm (☞ P. 20).
If you're not using the "DTA Controller", proceed to
specified time.
each day of the week (settable only using
"DTA Controller").
Play back music from your iPod (refer to
"Various audio sources" (P. 17)).
The iPod connected via Bluetooth is not
available. Set the iPod in the iPod dock.
Play back music from a CD.
Specify the track number (data CD: folder
number) (RESUME, 1-99).
Play back music from a USB device.
Specify the folder number (RESUME, 1-999).
Specify the preset number (RESUME, 1-30).
5 , the display will indicate
2
.
minutes.
5
.
) will light.