Listening To A Bluetooth Component; Connecting An Already-Paired Component Via Bluetooth - Yamaha TSX-B232 Mode D'emploi

Masquer les pouces Voir aussi pour TSX-B232:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT

Listening to a Bluetooth component

1
RADIO
AUX
USB
CD
iPod

Connecting an already-paired component via Bluetooth

Once pairing has been completed, connecting a Bluetooth will be easy the next time.
Connecting from this unit
RADIO
AUX
USB
CD
iPod
1 5 : 3 0
1 5 : 3 0
B T D T A i P h o n e
Connecting from the other component
In the Bluetooth settings of the other component, turn Bluetooth on.
1
From the Bluetooth connection list of the other component, choose this unit (TSX-B232 Yamaha).
2
The Bluetooth connection will be established, and the front panel display of this unit will indicate the name of the other
component.
Bluetooth connections cannot be established from the other component when this unit is in power saving. Turn the system on.
10
En
1
Press the
audio source to Bluetooth.
2
Connect this unit and your other component
via Bluetooth.
Play back music from your Bluetooth
3
component.
Take care that the volume setting of this unit is not too high. We
recommend that you adjust the volume on the other component.
• If you connect via Bluetooth from your other component and play
back music while this unit is turned off the system, this unit will
automatically turn on the system.
• If you disconnect the Bluetooth connection from your other
component while the audio source is set to Bluetooth, this unit
will automatically turn off the system.
• If Bluetooth is selected as the audio source, this unit will
automatically turn off the system when 60 minutes have elapsed
without any Bluetooth connection nor any operation performed.
Press the
source button to switch the
audio source to Bluetooth.
The Bluetooth indicator will blink in the front panel display;
this unit will search for the other component that was most
recently connected via Bluetooth, and will then establish a
connection (You must first turn on the Bluetooth setting of
the other component).
When the Bluetooth connection has been established, the
Bluetooth indicator will light, and the name of the other
component will be displayed.
Yamaha does not guarantee all connections between this unit and
Bluetooth component.
source button to switch the

Publicité

Table des Matières
loading

Table des Matières