Useful Functions; Using The Option Menu; Using The Sleep Timer - Yamaha MCR-B142 Mode D'emploi

Using the Option menu

When you press OPTION, the option menu will appear in the front panel display, allowing you to make the following settings.
(eject button) cannot be operated while the option menu is displayed.
Option menu
PRESET DELETE Deletes a stored preset (shown only if the audio source is FM/AM
DIMMER
Adjusts the brightness of the front panel display (1
EQ LOW
Adjusts the tonal character (low frequencies) (–10 - 0
EQ MID
Adjusts the tonal character (mid frequencies) (–10 - 0
EQ HIGH
Adjusts the tonal character (high frequencies) (–10 - 0
BALANCE
Adjusts the volume balance of the left and right speakers (L+10 - CENTER
POWER SAVING Switches the system-off state
NORMAL:
ECO
(power saving mode)
AUTO POWER You can specify the time after which the system will turn off automatically.
OFF If no operation occurs for the duration you specify, the system will turn off automatically
(TIME 12H
CLOCK SET Sets the date and time.
ALARM SET Sets the alarm.
*1
AM radio is available only for U.S.A. model.
*2
Default setting

Procedure for settings
1 4
2 3

Using The Sleep Timer

When the specified time has elapsed, the system will turn off automatically.
Press repeatedly
16
En

USEFUL FUNCTIONS

Show the clock
An iPod can be charged in the iPod Dock, and the alarm will operate
No clock display
*2 :
An iPod can be charged in the iPod Dock, but the alarm will not operate
*2
: 12 hours, TIME 8H: 8 hours, TIME 4H: 4 hours, OFF: the system will not turn off).
Setting or range
*1
*2
: bright, 2: medium, 3: dim).
*2 - +10 dB).
*2 - +10 dB).
*2 - +10 dB).
1 Press OPTION.
The option menu will appear.
 
2 Press / to select the menu item that you
want to set, and then press ENTER.
 
3 Press / to edit the setting, and then press
ENTER to confirm the setting.
If you want to continue making other settings, repeat the
procedure from step
4 Press OPTION to exit the option menu.
If you decide to cancel without changing the setting, press
OPTION before confirming the change.
Press SNOOZE/SLEEP repeatedly to specify the
time after which the system will turn off.
You can specify 30, 60, 90, 120 or OFF.
When you select a time, the sleep timer is turned on, and the
sleep indicator ( ) is shown in the front panel display.
If you press SNOOZE/SLEEP while the sleep timer is activated,
the sleep timer setting will be canceled.
).
*2 - R+10).
.
2
See page
14
–
–
–
–
–
–
–
6
18