SCS Sentinel VisioBell CFI0026 Notice D'utilisation Et D'installation page 28

Problem encountered
If the LED flashes red
If the LED flashes blue - Check that your doorbell is connected to Wi-Fi.
If the chime doesn't
ring
25°
25°
G- WARRANTY G- WARRANTY
Warranty 2 years
Not covered by the warranty:
• Material and electrical damage resulting from incorrect installation.
• Damage resulting from improper use (other than for its intended purpose) or
modifications.
• Damage resulting from the use and/or installation of parts not included or
recommended by SCS Sentinel.
• Damage DUE to a lack of maintenance or impact.
• Damage RESULTING from poor weather, such as hail, lightning or strong winds.
• Returns without a copy of the invoice or proof of purchase.
28 EN
- Check that your doorbell is registered.
- If the LED on your bell is fixed blue, it is ready to use.
- Proceed to the pairing following the below steps :
Keep the barcode in a safe place, along with
proof of purchase these will be requested if you
need to use the warranty.
It is essential to keep proof of purchase
throughout the warranty period.
Solutions
1- Click on the button
«PAIR».
2- The LED flashes in red.
3- Clik then on the push
button.
READY : the LED
illuminates in blue.