Removing a Battery
For more information about removing the second battery, see "Using the Module Bay" in your
online User's Guide.
CAUTION:
outlet, and disconnect the modem from the telephone wall jack.
NOTICE:
90 seconds to complete the battery replacement before the computer shuts down and loses any unsaved
data.
1
Ensure that the computer is turned off, disconnected from an electrical outlet, and
disconnected from the telephone wall jack.
2
If the computer is connected to a docking device (docked), undock it. See the documentation
that came with your docking device for instructions.
3
Slide and hold the battery-bay latch release on the bottom of the computer, and then remove
the battery from the bay.
18
System Information Guide
Before performing these procedures, turn off the computer, disconnect it from the electrical
If you choose to replace the battery with the computer in standby mode, you have up to