Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Configuring Picture Settings
You can use different picture settings in detail.
Press "MENU" button and select the Picture icon
by using " " or " " button. Press OK button to view
Picture Settings menu.
Operating Picture Settings Menu Items
•
Press "
" or " " button to highlight a menu item.
•
Use "
" or " " button to set an item.
•
Press
"MENU" button to exit.
Picture Settings Menu Items
Mode: For your viewing requirements, you can set
various screen modes. The Picture mode can be set
to one of these options: Cinema,Game,Dynamic
and Natural.
Contrast: Sets the lightness and darkness values
of the screen.
Brightness: Sets the brightness value for the
screen.
Sharpness: Sets the sharpness value for the objects
displayed on the screen.
Colour: Sets the colour value, adjusting the colors.
Power Save Mode: Use " " or " " button to select
Power Save Mode. Press " " or " " button to set
Power Save Mode as Eco, Picture Off and Disabled.
See the section, "Environmental Information" in
this manual for further information on Power Save
Mode.
Backlight (optional): This setting controls the
backlight level and it can be set to Low, Medium,
High and Auto.
Noise Reduction: If the broadcast signal is weak and
the picture is noisy, use Noise Reduction setting to
reduce the noise amount. Noise Reduction can be set
to one of these options: Low, Medium, High or Off.
Advanced Settings
•
Colour Temp
: Sets the desired colour tone.
Setting Cool option gives white colours a slight blue
stress.
For normal colours, select Normal option.
Setting Warm option gives white colours a slight red
stress.
•
Picture Zoom
: Sets the picture size to Auto,16:9,
Subtitle,14:9, 14:9 Zoom, 4:3, Panoramic or
Cinema.
•
HDMI True Black
source, this feature will be visible in the Picture
Settings menu. You can use this feature to enhance
blackness in the picture. You can set this feature as
"On" for activating HDMI True Black mode.
•
Film Mode (optional)
different number of frames per second to normal
television programmes. Press " " or " " buttons
to select Film mode. Press " " or " " buttons to
set this feature Auto or Off. Turn this feature to Auto
when you are watching films to see the fast motion
scenes clearly.
•
Colour Shift
: Adjust the desired colour tone.
Reset: Resets the picture settings to factory default
settings.
While in VGA (PC) mode, some items in Picture menu
will be unavailable. Instead, VGA mode settings will be
added to the Picture Settings while in PC mode.
PC Picture Settings Operation
For adjusting PC picture items, do the following:
Press " " or " " button to select Picture icon. Picture menu
appears on the screen.
Contrast, Brightness, Colour, Colour Temp and Picture
Zoom, Reset settings in this menu are identical to settings
defined in TV picture settings menu. Sound ,Settings and
Source settings are identical to the settings explained in
the main menu system.
PC Position: Select this to display PC position menu
items.
Autoposition: Automatically optimizes the display.
Press OK to optimize.
H Position: This item shifts the image horizontally to
right hand side or left hand side of the screen.
- 64 -
: While watching from HDMI
: Films are recorded at a
Publicité
Chapitres
Table des Matières
