Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
1
2
2
3
17
18
Chassis Layout
Top
Input jack – 1/4 inch phone jack.
1
Channel 1 Gain and Volume Controls.
2
Channel 1 Boost Switch – Activates the boost circuitry.
3
Boost LED – Illuminated Red when the boost is active.
4
Channel 1 Indicator LED – Illuminates Yellow when active.
5
Channel 1 Tone Controls – Treble, Bass, and Middle.
6
Vintage / Modern Switch
7
Channel Select Switch – Channel 1 is optimized for lead, Channel 2 for clean sound
8
Channel 2 Volume Control.
9
Channel 2 Indicator LED – Illuminates Green when active.
10
Channel 2 Brightness Switch – Add sparkle to your clean sound.
11
Channel 2 Tone Controls – Treble, Bass, and Middle.
12
Master Volume – Controls the overall level of the amplifier.
13
Reverb Control – Adjusts the Accutronics® reverb level for both channels.
14
Standby Switch – Activates standby mode to keep the tubes warm while the amp is not in use.
15
Power Indicator Jewel – Illuminates Red when in Active mode, and Yellow when in Standby mode.
16
Rear
Fuse and Power Cord
17
Power Switch.
18
Send / Rtn (Efx/Line) jacks – 1/4 inch phone Input and Output jacks.
19
Channel Select Footswitch jack – uses a 1/4 inch TRS standard latching dual-footswitch.
20
Extension Speaker jack –1/4 inch phone jack.
21
5
6
7
19
20
21
10
9
12
8
11
2
13
14
16
15
Publicité
Table des Matières
