Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
Publicité
Manuels Connexes pour Traynor DynaBass 200
Sommaire des Matières pour Traynor DynaBass 200
- Page 1 MODEL TYPE: YS1061 DynaBass 200 / 200T B a s s G u i t a r a m p l i f i e r...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS This lightning flash with arrowhead symbol, The exclamation point within an equilatereal within an equilateral triangle, is intended to alert triangle is intended to alert the user to the the user to the presence of uninsulated presence of important operating and “dangerous voltage”... - Page 3 The Mute button cuts off all audible signals to the speaker(s). For your convenience, your signal still runs to the Tuner jack. This enables you to tune your bass without having to adjust any settings on either the bass guitar or DynaBass 200 (and the audience will not be able to hear you tuning).
- Page 4 User Tip: You can “slave” your DynaBass 200 to another amp. As an example, if you wanted to run two bass amps for a large gig, you can simply run a shielded patch cable from the line...
- Page 5 Yes / Yes External speaker output / location Rear Headphone Jack Dimensions (DWH, inches) DynaBass 200: 14.25 x 20.75 x 23.5; DynaBass 200T:15.25x20.75x21 DynaBass 200: 36.5 x 53 x 60; Dimensions (DWH, cm) DynaBass 200T: 39 x 53 x 53.5 60 / 27.25...
- Page 6 Power Switch – Turns the AC mains on and off, the LED indicator illuminates when active. Tweeter Defeat / Active Switch – Enable / disable the internal DynaBass 200 tweeter. External Speaker Output Jack – ¼-inch phone jack. Connect additional speakers. (4-ohms min.).
- Page 7 Cela permet au DynaBass 200 de garder un son plus clair à des niveaux de sortie plus élevés, même lorsque la tension d’alimentation CA baisse en dessous de la normale.
- Page 8 Quand une fiche est insérée à la prise de retour d’effet, le signal est acheminé directement à l’amplificateur de puissance interne du DynaBass 200. En termes techniques, en insérant une fiche ¼ de pouce à la prise de retour d’effets, vous déconnectez...
- Page 9 ,vous n’avez qu’à raccorder un câble blindé à partir de la sortie ligne d’un autre amplificateur (peut-être un autre DynaBass 200) à la prise de retour d’effet de votre DynaBass 200. 10. Casque d’Écoute Quand une fiche de casque d’écoute est branché...
-
Page 10: Contrôle De Volume
Volume DynaBass Bass Low-Mid Hi-Mid Treble Scoop Inputs Power Post-EQ Pre-EQ Tuner Passive Active Phones Mute Limiter Line Out Send 400 Hz Defeat MODEL TYPE: YS1061 A-Z982AR / 2v1 TWEETER 230V 120VAC Active 50Hz 0,44A 60Hz 1.0A DESIGNED & MANUFACTURED BY YORKVILLE SOUND •... - Page 12 DynaBass 200 User Settings...
- Page 15 Yorkville Sound or your dealer. If this product should fail for any reason within two years of the original purchase date, simply return it to your Traynor dealer with original proof of purchase and it will be repaired free of charge.
- Page 16 WORLD HEADQUARTERS CANADA U.S.A. Yorkville Sound Yorkville Sound Inc. 550 Granite Court 4625 Witmer Industrial Estate Pickering, Ontario Niagara Falls, New York L1W-3Y8 CANADA 14305 USA Voice: (905) 837-8481 Voice: (716) 297-2920 Fax: (905) 837-8746 Fax: (716) 297-3689 May 27/2008 • Manual-Owners-db200-db200t-00-1v5...