Before Use - GBC ClassicCut CL100 Manuel D'utilisation

ClassicCut CL100 / CL120
Specifications
Models
Product Code
Sheet Capacity 80g/m 2
Cutting Length
Integrated Paper Guide
Size Guide
Diagonal Lines
Guillotine base with calibrated grid
Metric and Imperial scale guide
Transparent safetyguard
Blade / handle assembly
Cutting arm safety latch
NOTE: Please retain this information
regarding safe operation of this
paper guillotine
CAUTION: Guillotine should be operated
by an adult or under adult
supervision
CAUTION: Sharp blade, do not touch the
edge of the blade

Before Use

CAUTION: Sharp Blade. Lock blade arm
down with safety latch before
installing handle.
How to Install Safety Guard
B. Snap the safety guard securely into the proper
1
holes in the base as indicated in the pictures.
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 96333500
4
CL100
CC001200
10
300mm (12")
A4, A5, A6 & A7
Centimetres and Inches
15, 30, 45, 60 degrees
CL120
CC001205
10
457mm (18")
A3, A4, A5, A6 & A7
Centimetres and Inches
15, 30, 45, 60 degrees
CAUTION: Do not lubricate the blade
CAUTION: Always latch the blade/handle in
the down, closed position when
not in use
CAUTION: Do not carry the guillotine by
holding the cutting blade or the
cutting arm
CAUTION: Always operate the trimmer
with the safety guard in place
A. Hold the top of the guillotine with your left hand
1
and push the handle on to the end of arm until it
snaps into place.
C. Safety guard should now be locked in place and
2
is ready for you to start.