ECOVACS ROBOTICS DEEBOT M88 Manuel D'instructions page 30

5. Troubleshooting
No. Malfunction
DEEBOT returns to the
4 Charging Dock before it
finishes cleaning.
DEEBOT will not
5 clean automatically at
scheduled time.
DEEBOT misses the
6
spots to be cleaned.
28
EN
Possible Causes
When battery power gets
low, DEEBOT automatically
switches to Return to Charger
Mode and returns to the
Charging Dock to recharge
itself.
Working time varies
according to floor surface,
room complexity and the
selected Cleaning Mode.
Intelligent Scheduling/
Time Scheduling function is
cancelled.
DEEBOT is powered OFF.
The robot's battery is low.
The robot's components
are blocked and/or its
components are tangled with
debris.
Items on the floor in the
cleaning area need to be put
away.
Cleaning frequency is too
low.
Solutions
This is normal. No solution necessary.
This is normal. No solution necessary.
Set Intelligent Scheduling or Time
Scheduling. Please refer to section 3.4
Programming the Robot for details.
Power ON DEEBOT.
Keep DEEBOT powered ON and on
the Charging Dock to make sure it has
full battery to work at any time.
Turn the robot's power OFF, clean the
Dust Bin and invert the robot. Clean
the robot's Main Brush, Side Brushes
and other components as described in
section 4 Maintenance.
Please refer to section 3.1 Notes
Before Cleaning for details.
Daily cleaning is suggested to obtain
best results.