ECOVACS ROBOTICS DEEBOT M88 Manuel D'instructions page 15

Press and hold the AUTO Mode Button on the
Remote Control for 3 seconds. Random Cleaning
Pattern is set when DEEBOT emits two beeps.
Programmed Cleaning Pattern is set when DEEBOT
emits one beep.
Cleaning Patterns can also be set using the ECOVACS App.
DEEBOT uses the set Cleaning Pattern when cleaning in AUTO Cleaning Mode and Single Room Cleaning
Mode.
Select Cleaning Mode
1 AUTO Cleaning Mode
This is the most commonly used mode and is good
for every day cleaning.
To start AUTO Cleaning Mode, press the AUTO
Mode Button on the robot, on the Remote Control,
or on the App main screen.
* AUTO Cleaning Mode cleans using the Cleaning Pattern set in the previous step. Random
Cleaning Pattern is best for carpet. Programmed Cleaning Pattern is best for bare floors.
* When the cleaning cycle is complete, DEEBOT returns to the Charging Dock.
3. Operating and Programming
3 3
13
EN