Add Water To The Advanced Wet/Dry Reservoir - ECOVACS ROBOTICS DEEBOT M88 Manuel D'instructions

2

Add Water to the Advanced Wet/Dry Reservoir

* Before adding water to the Advanced Wet/Dry Reservoir remove the Advanced Wet/Dry
Reservoir from the bottom of the robot.
Fill the provided Measuring Cup with water. Open the Water Inlet lid on the Advanced Wet/Dry Reservoir
and slowly pour water from the Measuring Cup into the Reservoir. Close the Water Inlet lid.
Attach the Advanced Wet/Dry Reservoir to
the bottom of the robot. Insert the tabs on
the Advanced Wet/Dry Reservoir into the
Advanced Wet/Dry ReservoirSlots on the
bottom of the robot until you hear a click.
3. Operating and Programming
19
EN