Multi Display; Display Protection - NEC MULTEOS M40 Mode D'emploi

OSM Controls
OSM TRANSPARENCY
OSM RESET

MULTI DISPLAY

MONITOR ID
IR CONTROL
TILE MATRIX
POWER ON DELAY
MULTI DISPLAY RESET
DISPLAY POWER SAVE
PROTECTION
STANDBY MODE
HEAT STATUS
FAN CONTROL
SCREEN SAVER
SIDE BORDER COLOR
AUTO BRIGHTNESS
DVI, VGA, RGB/HV
input only
CHANGE SECURITY
PASSWORD
SECURITY LOCK
DISPLAY
PROTECTION RESET
- continued
Set the transparency level of the OSM.
OFF
TYPE1
TYPE2
Resets the following settings within the OSM menu back to factory setting:
OSM TURN OFF, OSM POSITION, INFORMATION OSM, and OSM TRANSPARENCY.
Sets the monitor ID number from 1-26.
Selects the mode of the monitor for use with the infra-red remote control when using
the RS-232C daisy chain.
NORMAL The monitor will be controlled normally by wireless remote controller.
PRIMARY Choose "PRIMARY" for the first monitor within an RS232-C daisy chain.
Choose "SECONDARY" for all subsequent monitors within an RS232-C daisy chain.
SECONDARY
LOCK Prevents the monitor from being controlled by wireless remote controller. To return to
normal operation, press the "DISPLAY" button on the remote controller for 5 seconds.
Allows one image to be expanded and displayed over multiple screens (up to 25)
through a distribution amplifier.
H MONITORS Number of monitors arranged horizontally.
V MONITORS Number of monitors arranged vertically.
Select which section of the tiled image to be displayed on the monitor.
POSITION
TILE COMP Turns the TILE COMP feature on.
ENABLE Enables Tile Matrix.
Adjusts the delay time between being in "standby" mode and entering "power on"
mode.
"POWER ON DELAY" can be set between 0 and 50 seconds.
Resets the following settings within the MULTI DISPLAY menu back to factory setting:
MONITOR ID, IR CONTROL, TILE MATRIX, POWER ON DELAY.
Sets how long the monitor waits to go into power save mode after a lost signal.
Lowers power consumption.
Note: RS232-C Function is lost when in Eco Standby mode.
Displays status of the COOLING FAN, BRIGHTNESS and TEMPERATURE.
Cooling fan reduces the temperature of the display.
Use the SCREEN SAVER function to reduce the risk of Image Persistence.
The gamma curve becomes narrow, reducing contrast and cutting down the risk of
GAMMA
image retention.
BRIGHTNESS The brightness is decreased when "ON" is selected.
MOTION The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT,
LEFT) at user determined intervals.
Adjusts the color of the side borders when a 4:3 image is displayed.
Press + button, the bar will become lighter.
Press - button, the bar will become darker.
Adjusts the brightness level according to the input signal.
Allows the security password to be changed. Factory preset password is 0000.
Locks the security password.
Resets the following settings within the Picture menu back to factory setting:
POWER SAVE, STANDBY MODE, FAN CONTROL, SCREEN SAVER, SIDE BORDER
COLOR, AUTO BRIGHTNESS.
English-30