Avoiding Material Damage; Overload Protection - Siemens MQ66 Serie Manuel D'utilisation

Masquer les pouces Voir aussi pour MQ66 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
▶ Never let the power cord come into contact with hot parts or be
dragged over sharp edges.
▶ Never place the appliance on or near hot surfaces.
▶ After switching off, wait until the drive has come to a complete
standstill.
▶ Keep hands, hair, clothing and utensils away from rotating parts.
▶ Never touch the edges of the blades with bare hands.
▶ Process hot food carefully.
▶ Leave boiling food to cool down to at least 70 °C before pro-
cessing.
▶ Follow the cleaning instructions.
▶ Clean surfaces which come in contact with food before each
use.
damage
material
Avoiding

Avoiding material damage

damage
material
▶ Do not operate the appliance at no-load.
Avoiding
▶ Never use the blender jug in the mi-
crowave or oven.
Overview
Overview
→ Fig.
Overview
1
Speed setting
1
On button 
2
Turbo button
3
Release buttons
4
Plastic blender foot or stainless-
5
steel blender foot
1
Lid
6
Plastic blender jug
7
1
2
Whisk
 
8
Universal cutter L
9
Universal cutter XL
10
"ProPuree" masher attachment
11
1
Depending on the model
2
separate operating instructions
Note: If an accessory is not included in the
scope of supply, it can be ordered from
customer service.
Printed on 100% recycled paper
1
1
1
2
 
1 2
1 2
Avoiding material damage en
Controls
Controls
Controls
Speed setting
For continuous speed adjustment. Set the
rotary selector between ● (lowest speed)
and 12 (highest speed).
On button
To use the appliance at the preselected
speed.
Turbo button
To use the appliance at maximum speed.
Note: The appliance remains switched on
as long as one of the buttons is pressed.
protection
Overload

Overload protection

protection
Only CNHR26 and CNHR26C
Overload
If the appliance switches itself off during
use, the overload protection device has
been activated.
Remove the mains plug and leave the appli-
ance to cool down for approx. 1 hour to de-
activate the overload protection device.
Note: If the fault cannot be eliminated,
please contact customer service.
feet
Blender
Blender feet
feet
Blender
Note: The blender feet are not suitable for
preparing purées consisting only of pota-
toes or foods with a similar consistency.
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mq67 serie

Table des Matières