Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. When install the new connector to the Heineken keg, you must firstly install the clear beer
tube one end to the connector, one end to the tap mechanism, then install the connector to
the Heineken keg.
Figure 8
Note: Please take out the Heineken adaptor with collect ways,
Press it according the arrow indication, or will damage the
fastener
Figure 10
3. Turn on the power switch to "I" position to power on the beer cooler. (While "0" position
is to power off) (Show as figure12).
Note: Please make sure your hands are dry when you operate the beer cooler, to avoid
electric shock.
Figure 12
Plug
Switch is on "off" status
Heineken Adaptor
Heineken keg
Figure 9
Beer connector
Figure 11
Hide quick links:
Publicité
Table des Matières
