H.Koenig BW1778 Manuel D'utilisation page 11

2. And connect the end of piercing pin, press the water into
the pin to clean the pin tube, and push the water out from
the beer tube at the other end. And repeat this cleaning
work till the beer tube clean (need 3 bottles warm water at
least); please clean the beer tap mechanism. Note: Please
open the tap when make the cleaning.
Warning:
Never put the tap mechanism parts in the washing machine
or dishwasher;
Never use the chemical cleaning detergent to clean the
parts, warm or purified water is recommended.
CHANGE SPARE PARTS (3 pieces Heineken adapter)
NO. Name
1 Adaptor
2 Cleaning pump
3 Beer tube
TO CHANGE BEER TUBE
Please replace the beer tube if beer tube is damaged and cause beer leakage.
1. Remove the top cover, let the tap handle in the direction of beer-outing when draw out the
tube.
2. Remove the tap clip, and then screw out the quick connector.
3. Install the new beer tube according with reverse procedure.
QT
Installment
Y
3 Heineken tub
1
1 Quick connector
Figure Note
1set
1pcs
1pcs