Front Panel Explanations; Main Switch - Atlantis HostPower 851 Manuel Utilisateur

1.8 Front Panel Explanations

On the front panel You can found a LCD Display for an easy diagnostic
LED

Main Switch

1
2
3
4
5
Plug the UPS into the wall outlet to charge the UPS for over 4
hours before using the UPS.
Information
To Control on/off the UPS when Utility is normal.
To enable "DC-Start" Function when Utility fails. (To enable DC
Start properly, you are recommended to connect <80% output
load with the UPS only). P.S. Make sure the computer connected
to the UPS is switched on before enable the "DC-Start" function.
You are not recommended to add some other computer or
peripherals after DC-Start function is activated.
Input voltage
Output voltage
AC mode indicator
Battery mode indicator
Load level indicator, flashing indicates overload
27