Operation Test - Atlantis HostPower 851 Manuel Utilisateur

Connect the supplied interface cable to the USB computer interface port on the
back of the UPS. Connect to the computer. Download and install software from
www.atlantis-land.com. See software document for installation instruction.

1.7 Operation Test

Connect the UPS to the wall receptacle.

Push on the Main Switch, after some seconds LCD Display AC Mode is on.

Connect your computer equipment with sockets of the UPS and pull off the

input power cable of the UPS from the wall receptacle to check the Battery
MODE is on (instead of AC Mode). Meanwhile, please check if alarm buzzer is
beeping every 10 seconds
Try the field working condition by running some application programs on your

computer and repeating step.
Check if the UPS is initiated properly to support continuous operation.

26