Controls - RC-Plus I-POWER 680 Manuel D'instructions

Capacity limit:
Temperature threshold: The battery's internal chemical reaction will cause the temperature of
Processing time limit:
Input power monitoring: To protect the car battery used as DC input power from being damaged,
Data store/load
The maximum five batteries' data can be stored for users' convenience. You can keep the data
pertaining to program setting of the battery of continuous charging or discharging. Users can call
out these data at any time without any special program setting.
Cyclic charging/discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for
battery refreshing and Balancing to stimulate the battery's activity.

CONTROLS

Temperature
Sensor port
Input power cable Input power cable
11-18V DC
Output charge lead
4mm banana plug
Balance Lead sockets
JST-XH ports
The charging capacity is always calculated as the charging current mul-
tiplied by time. If the charging capacity exceeds the limit, the process
will be terminated automatically when you set the maximum value.
the battery to rise. If the temperature limit is reached, the process will be
terminated. This function is available by connecting optional tempera-
ture probe, which is not included in our package.
You can also limit the maximum process time to avoid any possible defect.
its voltage keeps being monitored. If it drops below the lower limit, the
process will be ended automatically.
Output charge lead
4mm banana plug
Temperature
Sensor port
www.rcplus.eu
Output charge lead
4mm banana plug
Balance Lead
sockets
JST-XH ports
charge processes
balance charge mode
5