Intended Use - OHAUS Valor 1000 Serie Manuel D'instructions

TM
Valor 1000 Series

Do not load the equipment above it's rated capacity.

Do not drop loads on the platform.

Do not place the equipment upside down on the platform.

Use only approved accessories and peripherals.

Disconnect the equipment from the power supply when cleaning.

Service should only be performed by authorized personnel.
WARNING: Never work in an environment subject to explosion hazards!
The housing of the instrument is not gas tight. (Explosion hazard due to
spark formation, corrosion caused by the ingress of gases).
CAUTION: Battery is to be replaced only by an authorized Ohaus service
dealer. Risk of explosion can occur if the rechargeable battery is
replaced with the wrong type or if it is not properly connected. Dispose of
the rechargeable battery according to local laws and regulations.

1.2 Intended Use

This instrument is intended for use in businesses and light industry. It shall only be
used for measuring the parameters described in these operating instructions. Any
other type of use and operation beyond the limits of technical specifications, without
written consent from OHAUS, is considered as not intended. This instrument
complies with current industry standards and the recognized safety regulations;
however, it can constitute a hazard in use.
If the instrument is not used according to these operating instructions, the intended
protection provided by the instrument may be impaired.
EN-3