Logitech Harmony Touch Guide D'installation page 4

Logitech Harmony Touch
Set up your product
6 English
To set up your new Harmony remote,
you will need to do the following:
1. Gather the manufacturer name and
model number of your devices.
2.
Note how your home entertainment
system devices are wired and
connected together.
3. Fill in your home entertainment
system information using the
blank form.
Do I really need all my model
numbers?
Yes. The setup process will ask for all
your model numbers so the remote can
know how to control your devices. It's
better to gather them all at once rather
than needing to go back and forth from
your computer to your devices.
Where do I find my model
numbers?
Most devices have them somewhere
on the back or bottom, sometimes on
a label. Be sure to write the number
down accurately because entering an
incorrect or incomplete number may
cause you trouble.
What is an input?
Your TV can display video from
multiple home entertainment devices–
a cable/satellite box, a DVD player,
a game console, etc. You select a
different input to watch each of these
devices. The input also matches the
connector on the back of your TV.
Your Harmony remote will need to
understand what device is connected
to what input to best control your
system. (Some TVs use the term
"source" instead of "input.")
Logitech Harmony Touch
If you're using an audio video receiver,
it also has inputs—for video and sound.
Understanding these connections will
be important to complete setup. Is your
sound system switching both video and
sound for your setup, or just sound?
The Harmony software setup will ask
you questions about this.
Note: Some older audio receivers have only
inputs for sound, not video.
How do I gather my system
information?
Use the forms on the following pages
to record the information about your
home entertainment system.
Note: If you have more than 6 devices, we
have an expanded form online you can
use. Go to www.logitech.com/support/
harmonytouch
English 7