SADDLE
Insert the sleeve of the saddle in its housing and adjust the height, using the quick-
release terminals, as shown in the figure.
BATTERY ASSEMBLY
The X4 battery is internal and housed in the frame.
It can be removed and charged separately or, using the inlet on the frame, it
can be charged without removing it from the bike.
1)
Power inlet. The frame inlet is also found at this inlet. This lets you charge the battery without
removing it from the frame
2)
Lock knob with key
Place the battery in the frame compartment.
When the frame is closed, the fixed contacts
will adhere to the battery contacts.
EN
When the battery is placed inside and the X4 frame closed, lock the battery
with the supplied key to prevent theft.
5
(battery projection on 3
sides)