Axis D2050-VE Guide D'installation page 25

Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
I/O connector
Use the I/O connector with external devices in combination with, for example, event triggering
and alarm notifications. In addition to the 0 V DC reference point and power (DC output), the I/O
connector provides the interface to:
Digital input - For connecting devices that can toggle between an open and closed circuit, for
example PIR sensors, door/window contacts, and glass break detectors.
Digital output - For connecting external devices such as relays and LEDs. Connected devices
can be activated by the VAPIX® Application Programming Interface, trough an event or from
the product's webpage.
6-pin terminal block
Function Pin
1
DC ground
2
DC output
3–
Configurable
6
(Input or
Output)
Example
AXIS D2050-VE Network Radar Detector
Notes
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
Digital input – Connect to pin 1 to activate, or
leave floating (unconnected) to deactivate.
Digital output – Internally connected to pin 1 (DC
ground) when active, and floating (unconnected)
when inactive. If used with an inductive load, e.g.,
a relay, connect a diode in parallel with the load,
to protect against voltage transients.
25
Specifications
0 V DC
12 V DC
Max load = 50 mA
0 to max 30 V DC
0 to max 30 V DC,
open drain, 100 mA