Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
AXIS D2050-VE Network Radar Detector
Configure the detector
The detector is ready to use as soon as it is installed. The default live view will show the radar
coverage and any detected movement, and you can add detection zones and rules right away.
To make it easier to see where objects are moving, you can upload a reference map, for example a
ground plan or an aerial photo, that shows the area covered by the radar detector.
Image requirements:
•
Supported file formats are jpeg and png.
•
Use an image with the same proportions (16:9) or resolution (1920x1080) as the live
view. If the image is smaller it will be scaled to fit the window. If the proportions are
wrong, the image will not fill the entire video stream.
•
Crop the image to fit the coverage of the radar as closely as possible before uploading it.
•
The orientation is not important, since the radar coverage shape will be moved to adapt
to the image during calibration.
After uploading the reference map you need to calibrate the radar so that the actual radar coverage
fits the position, direction and scale of the reference map.
There are two methods for calibrating the reference map:
20
Publicité
Table des Matières
