Axis D2050-VE Guide D'installation page 18

AXIS D2050-VE Network Radar Detector
1
Nut
2
Gasket
3 Body
4
Seal
5
Cap
6
Plug (discard)
14. If using a grounding wire, attach it to the cable shoe using cable shoe pliers. Attach the
cable shoe to the grounding screw. Make sure the cable shoe is in contact with the
grounding surface.
15. Connect external devices to the detector.
16. Connect the network cable.
17. Make sure that the LEDs indicate the correct condition. See LED Indicators on page 24.
18. If required, move the radar unit to one of the other mounting directions, see Where
to install the product on page 11.
18