Bushnell MEDALIST 20-1354 Mode D'emploi page 7

LIQUID CRYSTAL DISPLAY (LCD) INDICATORS
Your MEDALIST's LCD incorporates illuminated indicators that advise the user unit of measure, when
the laser is actively firing, when a target has been acquired, and targeting modes. A summary of these
features is presented below:
UNIT OF MEASURE OPTIONS
The MEDALIST can be used to measure distances in yards or meters. The unit of measure indicators are
located in the lower right portion of the LCD. To select between yards and meters, quickly press and
release the POWER button to turn on the unit (on top of the unit), look through the eyepiece, depress the
"MODE" button and hold it down for approximately 5 seconds. If you are changing from yards to meters,
a change in unit of measure will be indicated by the illumination of the M for meter indicator while the
Y for Yard indicator is turned off. If you are changing from meters to yards, the opposite will occur. The
MEDALIST™ will return to the last unit of measure setting used each time the unit is turned on.
ACTIVE LASER
Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has
been acquired, you can release the power button. The crosshairs surrounding the circle will disappear
once the power button has been released (i.e. the laser is no longer being transmitted).
SELECTIVE TARGETING™ MODES
The MEDALIST™ was especially designed with golfers in mind. The selective targeting modes allow you
to adjust the performance parameters of the unit to suit your specific situation and environment. To move
from one mode to another, press the POWER button once to turn on the unit. While looking through the
eyepiece, press the MODE button and quickly release. The different targeting modes available and mode
indicators are listed below:
5