Product Features; Memory Function - Klarstein 10034627 Manuel D'utilisation

• With each and every change of tank content, completely remove residual water
from the equipment. To prevent nucleation, remove residual water from the
equipment and water tank every time after three days of use.
Note on using the water tank (not with all models)
In principle, you can use your air cooler at any time without water in the tank. It will then
work like a normal fan. Water in the tank is only needed for the cooling function. The
air cooler evaporates this through the nebulizer flow, removing heat from the air and
reducing the air temperature of the fan by up to 3 °C, depending on the coldness of the
water used. We advise against using the cooling function on days with particularly high
humidity, as it increases this further and can thus contribute to circulatory problems.

PRODUCT FEATURES

• Cooling:
In the appliance the water cycles to blow cool air. It can lower the surrounding
temperature and provide you a comfortable environment in hot summer.
• Detachable filtration mesh:
It is easy to clean. Filter removes harmful tiny substances, such as dust and pollen.
• Wide range of air output:
100° wide angle range of air output, 4 fan speeds: STRONG-HIGH-MID-LOW.
• Remote Control:
6 meters remote control, 120° wide angle range receiver.
• Beep sound reminder:
It has beep sound reminder function, convenient to use.

• Memory function:

It can memorize the current working status. The memory is not cleaned until the
power supply is off.
• More comfortable and convenient control system
EN
17