Klarstein 10034627 Manuel D'utilisation page 24

EN
24
Cleaning the water tank
1. Remove the plug from the wall outlet.
2. Pull out the water tank (see figure 4):
a. Push against the top in the handle of the water tank (1).
b. Pull out the water tank (2).
c. Loosen the clasps on both sides of the cover of the water tank (3).
d. Remove the cover of the water tank (4).
3. Clean the water tank with a little mild detergent on a cloth and then rinse in water.
4. After cleaning, replace the water tank cover and close the clasps on both sides of
the water tank cover. Slide the water tank back into the appliance.
Storage
• If the product is not going to be in use for a long time, unplug the power cord and
pack it away to prevent dust from entering the case.
• After packing, store it in a dry, ventilated place.
Figure 4