10
What to do if...
Problem
You cannot activate or oper‐
ate the hob.
If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Give also three digit
letter code for the glass ceramic (it is in
the corner of the glass surface). Make
sure, you operated the hob correctly. If not
the servicing by a service technician or
dealer will not be free of charge, also
A
MOD.
PROD.NO.
SER.NO
DATA
A. Stick it on Guarantee Card and send
this part (if applicable).
B. Stick it on Guarantee Card and keep
this part (if applicable).
Possible cause
The hob is not connected to
an electrical supply or it is
connected incorrectly.
The fuse is blown.
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
Labels supplied with the
accessories bag
Stick the adhesive labels as indicated
below:
C
MOD.
PROD.NO.
SER.NO.
0049
C. Stick it on instruction booklet.
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connec‐
tion diagram.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
TYPE
IP20