Self Test
dtx400/dtx400d.c.
To run self test , operate set while momentarily pressing wash. This activates the Self Test routine
in all Dedicated Micros drx receivers. See the drx series handbooks for more details.
AND
= SELF TEST
IRIS LEVEL PROGRAM
dtx300
To preset the aperture of the iris, press IRIS open or IRIS close until the desired level is reached,
then press set and iris open together to set the level.
Note: There is a 15 second time out, after reaching the required aperture setting, in which to
programme the iris setting. when this period expires, the iris reverts to its default setting.
AND
= IRIS SET
dtx400/400d.c.
To pre-set the aperture of the iris , press IRIS open or IRIS close until the desired level is achieved,
then press and hold set whilst pressing wipe to set.
Note:. There is a 15 second time out , after reaching the correct aperture setting, in which to
program the iris setting. When this time period expires, the iris reverts to its default setting.
Random Pan (drx300 receiver only)
AND
= IRIS SET
The drx300 telemetry receiver provides a random pan facility. During this operation the camera is
randomly panned left or right for random duration with random pauses. This produces an effect that
to the onlooker appears to be "manual control". During random operation the camera can be tilted
to any desired angle by normal operation of the tilt up/down keys. To start the random pan
operation press set and zoom out together. Random pan is disabled by pressing the pan right or
pan left keys.
AND
= RANDOM PAN
dtx 300, 400, 400d.c. Installation Manual
Page. 7