Introduction; General; Telemetry System Configuration - Dedicated Micros dtx300 Manuel D'utilisation

2. Introduction

GENERAL

The Dedicated Micros dtx300, 400, 400dc are user friendly keyboard telemetry controllers for use
with drx range of receivers as a single channel CCTV system. They are simple to install into either
a new or existing system the only connections being BNC input and output (or twisted pair) and 9
Volt d.c. plug mounted power supply that needs to be connected to a local 230 Volt a.c. mains
socket.

Telemetry System Configuration

9 Volt d.c.
P.S.U.
dtx 300, 400, 400d.c. Installation Manual
75 ohm
terminated
Monitor
Mains
Input
Dedicated Micros
Pan & Tilt
Head
Cable length
500m of
RG59
drx receiver
dtx 300
or
OR
dtx 400
Transmitter
Keep as short
as possible
Mains Input
Page. 3