Ninja Intelli-Sense CT680SSCCO Instructions page 4

IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
When using electrical appliances, basic safety precautions should always be
followed, including the following:
23 Keep hands, hair, and clothing out of the
container when loading and operating.
24 ONLY use attachments and accessories
that are provided with the product or are
recommended by SharkNinja. The use of
attachments not recommended or sold by
SharkNinja may cause fire, electric shock
or injury.
25 During operation and handling of the
appliance, avoid contact with moving
parts.
26 DO NOT operate the appliance with an
empty container.
27 DO NOT fill containers past the MAX FILL
or MAX LIQUID lines.
28 DO NOT microwave any containers or
accessories provided with the appliance.
29 DO NOT perform grinding operations with
the High-Speed Blender Cup and Pro
Extractor Blades Assembly.
®
30 Before operation, ensure that all utensils
are removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
31 When processing food, ALWAYS use the
Food Pusher. NEVER feed ingredients into
the Feed Chute Lid by hand or with other
utensils. Failure to use the Food Pusher
may cause personal injury.
5
1-877-646-5288
32 NEVER operate the appliance without lids
and caps in place. DO NOT attempt to
defeat the interlock mechanism. Ensure
that the container and lid are properly
installed before operation.
33 DO NOT remove Feed Chute Lid until
Blade Disc stops spinning.
34 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
35 NEVER leave the appliance unattended
while in use.
36 DO NOT open pour spout cap while
blender is operating.
37 DO NOT blend hot liquids. Doing so
may result in pressure buildup and steam
exposure that can pose a risk of the user
being burned.
38 If you find unmixed ingredients sticking to
the sides of the pitcher, stop the appliance,
remove the lid, and use a spatula to
dislodge ingredients. NEVER insert your
hands into the pitcher, as you may contact
one of the blades and experience a
laceration.
39 DO NOT attempt to remove the container
and lids from the motor base while the
blade assembly is still spinning. Allow the
appliance to come to a complete stop
before removing lids and containers.
40 Upon completion of processing, ensure
that the blade assembly is removed
BEFORE emptying container's contents.
Remove the blade assembly by carefully
grasping the top of the shaft and lifting
it from the container. Failure to remove
the blade assembly before emptying the
container results in a risk of laceration.
41 Remove the Pro Extractor Blades
®
Assembly from the High-Speed Blender
Cup upon completion of blending. DO
NOT store ingredients before or after
blending them in the cup with the blade
assembly attached. Some foods may
contain active ingredients or release gases
that will expand if left in a sealed container,
resulting in excessive pressure buildup that
can pose a risk of injury. For ingredient
storage in the cup, use only Spout Lid to
cover.
42 If the appliance overheats, a thermal switch
will activate and temporarily disable the
motor. To reset, unplug the appliance
and allow it to cool for approximately 15
minutes before using again.
43 The maximum wattage rating for this
appliance is based on the configuration
of the Pro Extractor Blades Assembly
and High-Speed Blender Cup. Other
configurations may draw less power or
current.
SAVE THESE INSTRUCTIONS
44 DO NOT process dry ingredients without
adding liquid to the High-Speed Blender
Cup. The High-Speed Blender Cup is not
intended for dry blending.
45 Always exercise care when handling the
Slicing/Shredding Disc, as it is sharp. Use
the finger holes when placing or removing
disc. Failure to use the finger holes will
result in a risk of laceration.
46 DO NOT submerge the motor base or
touchscreen in water or other liquids. DO
NOT spray the motor base or touchscreen
with any liquid. Turn off and unplug the
motor base before cleaning.
47 DO NOT overfill.
48 DO NOT remove the container from
the motor base while the appliance is in
operation.
49 Keep hands, hair, clothing, as well as
utensils out of container while processing
to reduce the risk of severe injury to
persons or damage to the appliance. A
scraper may be used but only when the
appliance is not running.
50 Avoid contact with moving parts.
51 DO NOT attempt to operate the appliance
without the lid on.
n i n j a k i tc h e n . c o m
6