Turning Power On/Off; Turning On The Main Power - Sharp PN-L705H Manuel D'installation

Caution
• Turn on the monitor first before turning on the computer or
playback device.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.

Turning on the main power

Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• For a complete electrical disconnection, pull out the main
plug.
Turning power on
Press the POWER button or MONITOR ON button to turn the
power ON.
Power LED
Status
Blue lit Power on
Orange lit Power off (Standby mode)
Blue flashing Input signal waiting mode
TIPS
• You can fix the input mode that appears after startup. Set
START INPUT MODE on the SETUP menu.

Turning Power On/Off

nDate/time setting
• If the time has yet to be set when the monitor is first turned
• Be sure to set the date and time.
• The date/time setting screen will close automatically if
• Set the date in "Month/Day/Year" order.
• Set the time on a 12-hour basis.
• The clock is maintained by the internal battery.
• If you already set the time but the date/time setting screen
• Estimated service life of the internal battery: About 5 years
• The initial battery was inserted at the factory when the
Turning power off
Turning power off with monitor buttons
1. Touch the POWER button.
2. Touch [OK].
POWER button
Status of the monitor
• If about 15 seconds elapses while the recognition screen
Turning power off with remote control unit
1. Press the POWER button or MONITOR OFF button.
on, the date/time setting screen appears. Set the date and
time.
DATE/TIME SETTING
/ /
01 / 01 / 20 17
OK:[ENTER] CANCEL:[RETURN]
(1) Press the or button to select the date and time,
and press the or button to change the numerical
values.
(2) Press the ENTER button.
no operation is performed for about 15 seconds. The
date and time can be set using DATE/TIME SETTING
from the SETUP menu when the date/time setting screen
disappears.
TIPS
appears when the power is turned on, the internal battery
may be exhausted. Please contact your local SHARP
servicing dealer or service center for assistance with
battery replacement.
(depending on monitor operation)
monitor was shipped, so it may run out of power before its
expected operation life.
The recognition screen appears.
The power is turned off. (Standby mode)
TIPS
appears, the power will automatically turn off.
The power is turned off. (Standby mode)
: :
12 : 00 AM
7
E