Cleaning - Weston 33-1301-W Mode D'emploi

CLEANING

!
WARNING
before cleaning, disassembling or assembling. Do not immerse cord,
plug or motor in water or other liquid.
1. Unplug from outlet.
2. Unscrew the Ring Nut and remove all parts
from the Grinder Head.
3. To remove the Grinder Head, pull the lever
on the Cam Action Lock down, unlocking the
Grinder Head, and remove the Grinder Head
by pulling it straight out (FIGURE A).
4. Wash all parts that come in contact with
food in hot soapy water. Rinse with clear water.
Dry immediately. The Grinder parts are not
dishwasher safe. Do NOT use bleach.
5. Fully lubricate the Grinder Head, Grinding
Plates and the Knife with food grade silicone
spray before and after each use.
6. Clean the Main Body with a soft damp towel.
Dry immediately. DO NOT immerse the Main
Body of the Grinder in water or other liquids.
8
ELECTRICAL SHOCK HAZARD: Disconnect power
Cam Action Lock