Device Care; Maintenance - I-Tech MIO-CARE PRO Notice D'utilisation

Maintenance

If used following the instructions given in this user guide, the equipment does
not require any particular kind of maintenance.
It is recommended that the manufacturer carries out a functional test every
24 months. The manufacturer does not consider the MIO-CARE PRO device
repairable by any personnel outside the company. Each operation of the kind
perpetuated by personnel not authorized by the manufacturer will be
considered as tampering the device, freeing the manufacturer from granting
warranty and from any danger that the user or the operator may be exposed
to.
CLEANLINESS
Clean the device using only a dry soft cloth. Resistant strains can be removed
using a sponge soaked in solution of water and alcohol, do not use detergents
or other aggressive agents.
Remove the battery before proceeding with the cleanliness of the device.
Device not subject to sterilization.
Note:
Never use solvents for cleaning. Cleaning agents cause damage to
−
the device.
− Attention to the need for periodic maintenance, especially:
inspection of main body for cracks, which may allow the ingress
•
of conductive fluid;
• inspection of the main cable and associated connectors.
TRANSPORTATION AND STORAGE
Precaution for the transportation
There is no particular precaution to be taken during transportation of the
device, since MIO-CARE PRO is a portable device. In any case it is
recommended to store MIO-CARE PRO and its accessories in the supplied
carrying bag after each treatment. Protect the device from high temperature,
direct daylight and liquids.
Precaution for the storage
Store the device in a cool, well-ventilated place. Do not store heavy objects
on the device.
It is recommended to switch off MIO-CARE PRO at the end of each treatment
and to remove the cables from the connectors. MIO-CARE PRO should be kept
in the supplied carrying bag, together with the rest of the equipment supplied
IACER Srl 107

Device care

MNPG148-05