Garland BEAR 804 VE-V20 Manuel De L'utilisateur page 33

outdoor use. The use of an extension of cord suitable
for outdoor use reduces the risk of electric shock.
Position the extension cord so that it does not get
caught in branches or obstacles and so it is not in the
work area.
Always keep the cord away from the cutting tool.
Do not use this machine if the switch does not change
between "open" and "closed". Any electric
machine that cannot be controlled with the switch is
dangerous and must be repaired.
Always unplug the machine before performing any
work on this machine. Only handle this machine when
it is disconnected.
2.5. USE AND CARE OF THE MACHINE
Use only machine accessories, tooling, etc. in
accordance with these instructions and as intended,
taking into account the working conditions and the
work to be developed. The use of this mower for uses
other than the designated operations may result in
dangerous situations.
Check that all the safety devices are installed and in
good condition.
Remember that the machine operator is responsible
for the dangers and accidents caused to other people
or things. The manufacturer will not be in any way
liable for damages caused by improper or incorrect
use of this machine.
Keep your body away from the cutting tool while using
the machine.
Do not force this machine. Use this machine to the
correct application. Using the machine for the type of
work meant to be done will allow you to work better
and more safely.
Never attempt to cut logs larger than those indicated
in this manual this could be dangerous for the
operator, machine and others.
Do not use this machine if the switch does not change
between "open" and "closed". Any machine that
cannot be controlled with the switch is dangerous and
must be repaired.
Keep this machine maintained and in proper condition.
Check that the moving parts are not misaligned
or locked, that there are no broken parts or other
conditions that may affect the operation of this
machine. Whenever this machine is damaged, repair
it before use. Many accidents are caused by poorly
maintained machines.
If the cutting tool connects with a strange object while
being used, disconnect the machine from the electric
source and inspect the machine before continuing. If
you detect any sign of damage, take your unit to the
technical service.
Before making any adjustments, changing
accessories, cleaning, transportation, or storage of this
machine, turn off and unplug the machine, and make
sure that the cutting tool is stopped. Such preventive
safety measures reduce the risk of accidentally
starting this machine.
Remove the plug from the power source before
making any adjustments, changing accessories, or
storing the machine. Such preventive safety measures
reduce the risk of accidental starting this machine.
If the machine starts to vibrate in a strange way, turn
it off and examine it to find the cause. If you cannot
discover the reason take the machine to the service
33/156
English