Transport; Storage; Recycling Or Disposal Of Your Machine - Garland BEAR 804 VE-V20 Manuel De L'utilisateur

9. TRANSPORT

Before transporting this machine, always unplug the
machine. Always transport this machine with the
engine stopped.
Before moving the machine, be sure to tie the two
control levers together to prevent outward swinging
movements from accidentally injuring people /
damage or other nearby equipment.
To avoid hydraulic oil leakage, never carry the strainer
on its side and tighten the bleed screw.
Always leave the blade absolutely down for transport.
a
to tip the chipper and rest it on the support wheel
and the transport wheels. Transport the machine by
pushing it.

10. STORAGE

Store this tool in a place not accessible to children
and safe so that does not endanger any person and
make it dry, clean and at a temperature between 0°C
and 45°C.
To transport the appliance
use its wheels.
Place the support wheel
(Fig 4.2.-15) in the
transport position (see
5.2.6) Place the handle in
the transport position (see
5.2.7)
Pull the carrying handle
If you have to lift the
machine with a crane, tie
the rope at the lifting point
indicated on the machine
by the symbol you see in
the figure.
Before storing the machine follow the maintenance
chapter points.
Always unplug the machine before storing it. Remove
the plug from the power supply before storing the
machine.
Tighten the bleed screw to avoid leaks of the log
splitter's oil trap.
11. RECYCLING OR DISPOSAL OF
YOUR MACHINE
Protect the environment. Recycle this machine's used
oil by taking it to a recycling center. Do not pour used
oil in drains, land, rivers, lakes, or seas.
Dispose of your appliance sustainably.
We should not get rid of machines
with domestic waste. Plastic and metal
components can be classified according to
their nature and recycled.
The materials used to pack this machine
are recyclable. Please do not throw the
packaging away with domestic trash. Throw
these packages away at an official collection point.
49/156
English