Setting Up Internet@Tv - Samsung 6 Serie Mode D'emploi

Account Login
For an application with multiple categories, use ◄ and ► to
access the different categories.
Login
User account :
Password :
Move [0~9] Enter PIN R Cancel
A
✎
For a more enjoyable application experience, register
and log in to your account.
✎
For instructions on creating an account, refer to
up Internet@TV → Internet@TV ID → Create.
1. Press the Red button in Internet@TV home page.
2. Select desired User account, then press the ENTERE
button.
✎
If you want create account, press Red button then
create account OSD window appear.
3. Enter the Password.
✎
When login succeeds, User account will be
displayed on the screen.

Setting up Internet@TV

¦
Settings
Create IDs and configure Internet@TV settings from this
screen. Highlight Settings using ▲ and ▼ buttons and press
the ENTERE button.
Settings
▪ System setup
▪ Ticker Autorun
▪ Internet@Tv Id
▪ Channel Bound Service
▪ Service Manager
▪ Change the Service lock password
▪ reset
▪ Properties
System Setup
■
✎
Ticker Autorun may not be supported depending
on country.
Ticker Autorun (Off / On): Enable/disable ticker autorun
upon powering on the TV.
Channel Bound Service (Off / On): Some channels
support application as an Internet data service, allowing
you to access the Internet service while watching TV.
✎
Only available if supported by the broadcaster.
adgjm
Setting
: Off
: Off
R return
Reset: Resets Internet@TV settings to factory default
settings.
Change the Service Lock password
✎
The default password set is "0-0-0-0."
✎
If you forget the password, press the following
sequence of remote control buttons to reset the
password to "0-0-0-0":
9 → 2 → 8 →
POWER
Internet@TV ID
■
You can use this menu when creating, deleting the
account. You can control your account including
contents site's account information.
✎
Account is only for internet@TV.
Create: Create an account and link it with desired
service application.
✎
NOTE
x
Account will be made less than 10.
x
Maximum number of characters is 10.
How to create Internet@TV ID
Before create User account, you should download the
application first on the Samsung Apps.
1. Using the ▲/▼/◄/► button, select Settings. Then
press the ENTERE button.
2. Press the ▼ button to select Internet@TV ID, then press
the ENTERE or ► button.
3. Select Create. The Keypad screen will appear.
4. The keypad OSD will be displayed on the screen.
Using the Keypad
Pressing the – button on the remote while you are using
the Screen Keypad enables you to change the text fields
to lower case, upper case, numbers and icons.
You can use this Screen Keypad in a several Internet@
TV applications.
Here is how to input characters.
4-1. For example, suppose that you want to input
"105Chang".
4-2. Press the – button on the remote twice to change
the input mode from lower case to numbers.
4-3. Press the 1, 0 and 5 button in numerical order.
4-4. Press the – button on the remote 3 times to change
the input mode from numbers to upper case.
4-5. Press the 2 button on the remote 3 times to input C.
4-6. Press the – button on the remote 3 times to change
the input mode from upper case to lower case.
4-7. Press buttons on the remote to input the rest of
"Chang". When done, press the ENTERE button.
POWER (off) → MUTE →
(on).
41
English