Table Des Matières - Tornado 93030 Manuel D'utilisation

GENERAL
This machine is intended for commercial use.
This manual is furnished with each new wide
area vacuum cleaner. It provides necessary op-
eration, maintenance instructions and parts list.
Read this manual completely and under-
stand the machine before operating or
servicing it.
When ordering replacement parts use the Parts
Lists section in this manual. Before ordering
parts or supplies, be sure to have your machine
model number and serial number handy. Parts
and supplies may be ordered online, by phone,
by fax or by mail or from any Tennant or Nobles
Authorized Service Center or Distributor.
UNCRATING MACHINE: Carefully check carton
for signs of damage. Report damages at once to
carrier.
PROTECT THE ENVIRONMENT
Please dispose of packaging
materials and old machine com-
ponents in an
environmentally safe way accord-
ing to local waste disposal regula-
tions.
Always remember to recycle.
Specifications and parts are subject to change with-
out notice.
The model and serial number of this product may be found on the back side of the unit. You should
complete the enclosed warranty card and mail it back to us as soon as possible for your protection.
Also, note the model and serial number of your unit in the spaces provided below, and retain this
book as a permanent record of your purchase.
Model Number: ___________________________________________________________________
_________________
Serial Number: ____________________________________________________________________
________________
Date Purchased: __________________________________________________________________
_________________
Your new wide area vacuum cleaner is a product of high quality materials and superior workmanship.
We urge you to read these operating instructions carefully before you use this vacuum cleaner, in
order to obtain the full performance and satisfaction it can offer you.
Warranty ..............................................................2
mportant Safety Instructions ..............................4
I
Grounding Instructions ........................................5
Safety Label ........................................................5
Parts Identification ..............................................6
Replacement Bags and Filters ............................6
Handle Adjustment .............................................7
Bag Installation ...................................................7
Brush Height Adjustment ....................................7
Operation of Machine ..........................................7
Circuit Breaker .....................................................7
Machine Maintenance .........................................7
For Best Performance .........................................7
Exhaust Filter Replacement ...............................8
Belt Adjustment and Replacement ......................8
Vacuum Motor Filters ...........................................8
Machine Specifications ........................................8
Electrical Diagram ...............................................8
Recommended Spare Parts ..............................23
CUSTOMER'S RECORD
3
INDEX